• EOL – WHEEL ALIGNMENT SYSTEM

    End of the Line – Wheel Alignment System for Multi-Axle Trucks, Buses & Trailers.

    • World’s 1st 3D Wheel Aligner for Multi-Axle Trucks, Buses & Trailers.
    • With Innovative Image Processing technology the Drive through version of JUMBO 3D Super customized with provision for Simultaneous alignment upto 6 Axles is a perfect solution for End of the Line (EOL) – Wheel Alignment.
    • One shot run-out compensation of all the 6 Axles.
    • One shot Caster swing for Twin steer axles.
    • Measures all the 6 axles within 3 minutes.
    • No Electronics on Wheels hence less failure & Maintenance.
    • Magnetic Wheel Brackets enables the user for quick clamping of wheels , hence reduced cycle time & Higher Productivity.
    • Software guided process sequence avoiding manual interference.
    • Automatic data pushing to Manufacturer Engineering System (MES).
    • Barcode scanner provided for scanning the Vehicle Identification Number (VIN) which is used for quick & Easy retrieval of specification from the stored database.
    • Extra monitor provided to view screen underneath from the PIT.
    • Smart control using Wi-Fi enabled tablet & Mobile device to display alignment results and to operate the PC from Alignment bay, Avoids multiple trips to PC console.

    FEATURES​

    Jumbo 3D uses latest, innovative, digital-imaging technology using  4 digital cameras for data-acquisition. High resolution 10 Megapixel digital cameras operate with intelligent software & capture seamless images of targets

    Jumbo 3D Super 6A uses 12 target plates at a time to measure  simultaneous Run out

    No expensive service bills if accidentally target plate is dropped
    Calibration not required
    Free from battery discharge issues
    Compact and light weight

    4 Nos Rotary Plates capable of handling multi- axle Bus / Trucks capable of handling  7 tons capacity.

    Caster swing can be performed for twin steer axles simultaneously.

    Alignment of Front twin steer axles to maintain parallel condition

    Alignment of drive and tandem axles in multi axle trucks


    Highly user-friendly Wi-Fi enabled Tablet & Mobile device to display alignment results & to operate PC from Alignment bay. Avoids multiple trips to PC console.

     

    STANDARD ACCESSORIES​

    Wheel brackets(12"-24")
    Jumbo 3D 6A – 12 Nos.
    Jumbo 3D 5A – 10 Nos.
    Jumbo 3D 4A – 8 Nos.

    Target plates
    Jumbo 3D 6A – 12 Nos.
    Jumbo 3D 5A – 10 Nos.
    Jumbo 3D 4A – 8 Nos.

    Rotary Plates – .
    (7 ton) with Spacers
    Jumbo 3D 6A – 4 Nos.
    Jumbo 3D 5A – 4 Nos.
    Jumbo 3D 4A – 4 Nos.

    Steering Lock
    Jumbo 3D 6A – 1 No.
    Jumbo 3D 5A – 1 No.
    Jumbo 3D 4A – 1 No.

    Brake Pedal Lock
    Jumbo 3D 6A – 1 Nos
    Jumbo 3D 5A – 1 No.
    Jumbo 3D 4A – 1 No.

    PC console with Windows
    10 IoT, Key board & Mouse
    Jumbo 3D 6A – 1 No.
    Jumbo 3D 5A – 1 No.
    Jumbo 3D 4A – 1 No.

    LED monitor (21.5")
    HDMI / DP interface
    Jumbo 3D 6A – 1 No.
    Jumbo 3D 5A – 1 No.
    Jumbo 3D 4A – 1 No.

    LED monitor secondary
    (21.5") HDMI / DP interface
    Jumbo 3D 6A – 1 No.
    Jumbo 3D 5A – 1 No.
    Jumbo 3D 4A – 1 No.

    Wheel stoppers
    Jumbo 3D 6A – 2 Nos.
    Jumbo 3D 5A – 2 Nos.
    Jumbo 3D 4A – 2 Nos.

    Truck alignment &
    Data manager software
    Jumbo 3D 6A – 1 No.
    Jumbo 3D 5A – 1 No.
    Jumbo 3D 4A – 1 No.

    Target stands
    Jumbo 3D 6A – 3Tx4 Nos.
    Jumbo 3D 5A – 3Tx2 & 2Tx2 Nos.
    Jumbo 3D 4A – 2Tx4 Nos.

    Chain Block with Ratchet
    (Rear single axle adjuster)
    Jumbo 3D 6A – 1 No.
    Jumbo 3D 5A – 1 No.
    Jumbo 3D 4A – 1 No.

    Steering lock (LCV)
    Jumbo 3D 6A – 1 No.
    Jumbo 3D 5A – 1 No.
    Jumbo 3D 4A – 1 No.

    Brake pedal lock (LCV)
    Jumbo 3D 6A – 1 No.
    Jumbo 3D 5A – 1 No.
    Jumbo 3D 4A – 1 No.

    Front target plate
    extension spacer 150 mm long
    Jumbo 3D 6A – 6 Nos.
    Jumbo 3D 5A – 6 Nos.
    Jumbo 3D 4A – 6 Nos.

    Adaptor for rim locking
    pins with storage box
    Jumbo 3D 6A – 12 Nos.
    Jumbo 3D 5A – 40 Nos.
    Jumbo 3D 4A – 32 Nos.

    Optional ACCESSORIES​

    Wheel bracket extension adaptors upto 30”
    Jumbo 3D 6A – 48 Nos.
    Jumbo 3D 5A – 40 Nos.
    Jumbo 3D 4A – 32 Nos.

    Rotary plate ramp
    Jumbo 3D 6A – 6 Nos.
    Jumbo 3D 5A – 6 Nos.
    Jumbo 3D 4A – 6 Nos.

    Frame reference gauge
    Jumbo 3D 6A – 1 No.
    Jumbo 3D 5A – 1 No.
    Jumbo 3D 4A – 1 No.

    Frame offset gauge
    Jumbo 3D 6A – 1 No.
    Jumbo 3D 5A – 1 No.
    Jumbo 3D 4A – 1 No.

    Tyre dia guage
    Jumbo 3D 6A – 1 No.
    Jumbo 3D 5A – 1 No.
    Jumbo 3D 4A – 1 No.

    Drawbar gauge
    (Full trailer)
    Jumbo 3D 6A – 1 No.
    Jumbo 3D 5A – 1 No.
    Jumbo 3D 4A – 1 No.

    4 shaft Calibration kit
    Jumbo 3D 6A – 12 Nos.
    Jumbo 3D 5A – 40 Nos.
    Jumbo 3D 4A – 32 Nos.

    Extension spacer (600 mm) Jumbo 3D 6A – 4 Nos.
    Jumbo 3D 5A – 4 Nos.
    Jumbo 3D 4A – 4 Nos.

    Double end rim locking
    pins (Steel rims)
    Jumbo 3D 6A – 48 Nos.
    Jumbo 3D 5A – 40 No2.
    Jumbo 3D 4A – 32 Nos.

    Double end rim locking pins
    (Low profile Steel rims)
    Jumbo 3D 6A – 48 Nos.
    Jumbo 3D 5A – 40 Nos.
    Jumbo 3D 4A – 32 No2.

    Double end rim locking pins
    (Long bolt rims)
    Jumbo 3D 6A – 48 Nos.
    Jumbo 3D 5A – 40Nos.
    Jumbo 3D 4A – 32 Nos.

    CVT (Constant voltage
    transformer) 1KVA
    Jumbo 3D 6A – 1 No.
    Jumbo 3D 5A – 1 No.
    Jumbo 3D 4A – 1 No.

    Drive Thru’ kit
    Jumbo 3D 6A – 1 No.
    Jumbo 3D 5A – 1 No.
    Jumbo 3D 4A – 1 No.

    Wheel off Camber
    adjustment kit (LCV)
    Jumbo 3D 6A – 1 No.
    Jumbo 3D 5A – 1 No.
    Jumbo 3D 4A – 1 No.

    Printer
    Jumbo 3D 6A – 1 No.
    Jumbo 3D 5A – 1 No.
    Jumbo 3D 4A – 1 No.

    Technical Specification

    Measurement Paraments Range Accuracy
    Camber (Front / Rear) ± 15° 00' ± 00° 02'
    Caster ± 28° 00' ± 00° 05'
    Kingpin Inclination ± 25° 00' ± 00° 05'
    Teo (Front/Rear) ± 20° 00' ± 00° 02'
    Total Toe ± 40° 00' ± 00° 04'
    Setback (Front / Rear ) ± 25 mm ± 2 mm
    Scrub / Thrust Angle ± 10° 00' ± 00° 02'
    Runout ± 10° 00' ± 00° 02'
    Included Angle ± 40° 00' ± 00° 05'
    Track width Actual ± 2 mm
    Power Supply (wheel Aligner) 230V, 50Hz / 110V AC, 60Hz
    Power 250 W
    Operating temperature 0°-50°C

    DOWNLOADS​

    EOL - Wheel Alignment System

    Related ProductS

    Axle Alignment System

    Read more

    Online Chassis Axle

    Read more

    Get 30% off your first purchase

    Got it!
    X
     
    Return to shop